CME2023 : Transfer Processes 2
- Offered for Year: 2024/25
- Module Leader(s): Professor Jonathan Lee
- Lecturer: Dr Fernando Russo Abegao
- Owning School: Engineering
- Teaching Location: Newcastle City Campus
Semesters
Your programme is made up of credits, the total differs on programme to programme.
| Semester 1 Credit Value: | 20 |
| ECTS Credits: | 10.0 |
| European Credit Transfer System | |
Aims
This module reinforces and adds to the knowledge of heat transfer and fluid mechanics gained in Stage 1. The study of heat transfer is extended to systems which are no longer steady state and have changes in phase. Heat exchanger design is greatly extended from the simple counter and cocurrent designs to numerous designs. Radiative heat transfer is introduced. The fluid mechanics of pumps are studied in detail, and again the course extends the knowledge to analyse new types of fluids and flow, including gas flows and flows containing multiple phases.
1. Fluid Mechanics:
CME1023 provided a fundamental understanding of fluid flow and properties. This course aims to generalise fluid mechanics so that at a later stage, the knowledge gained can easily be used in numerical simulations, such that the students understand the meaning and implications of exact/approximate solutions in the description of fluids, flow geometry and flow kinematics. Governing fluid flow equations, including the equations of state, are obtained in 3D form in tensor notation and applied to the flow of Newtonian and non-Newtonian fluid flows in simple geometries. More complex fluid systems such as compressible and multi-phase fluids are also examined and related to the process industries.
2. Heat Transfer:
i. To extend the knowledge of the principles of heat transfer gained in CME1023 and to provide a fundamental knowledge of design criteria for typical forms of heat exchangers used in the process industries.
ii. To enable the students to analyse heat transfer in systems where there is change of phase.
iii. To introduce and analyse transient heat transfer.
iv. To allow the students to analyse systems where radiative heat transfer is significant/dominant.
v. To ensure that students can design and choose appropriate equipment in their design projects.
Outline Of Syllabus
Heat Transfer
1. Review of heat transfer aspects of CME1023.
2. Thermal circuits: combinations of heat transfer modes in series and parallel, including radiation.
3. Boiling and condensing heat transfer. Nucleate and film boiling. Film and dropwise condensation.
4. Analysis of transient phenomena. 1D conductivity equation. The lumped capacitance method.
5. Heat exchanger design. Design methodology. Effectiveness-NTU and F-factor methods. Design and applicability of various heat exchanger forms: multipass, plate fin and compact heat exchangers.
6. Basic concepts of radiation. Planck equation. View factors. View factor algebra. Grey enclosures. Radiosity. Radiation shields.
Fluids
1. Review of fluid flow concepts from Transport Processes 1 .
2. Momentum balances, 1 dimensional + examples, two dimensional, stresses in fluids flows, non- Newtonian fluids.
3. Design of pumping systems, pipe networks, pump selection, NPSH.
4. Compressible flow, compresser characteristics and selection.
5. Multiphase flows, gas-liquid and liquid-liquid.
6. Mixing, power curves for single phase mixing. Solids suspension.
Teaching Methods
Teaching Activities
| Category | Activity | Number | Length | Student Hours | Comment |
|---|---|---|---|---|---|
| Structured Guided Learning | Lecture materials | 40 | 1:00 | 40:00 | Study of materials for fluids and heat transfer, to help students engage with lectures. |
| Guided Independent Study | Assessment preparation and completion | 25 | 1:00 | 25:00 | Time for revision and preparation for exam, writing and preparation of the design assignment. |
| Scheduled Learning And Teaching Activities | Lecture | 43 | 1:00 | 43:00 | Lectures in Fluid Dynamics and Heat Transfer. |
| Scheduled Learning And Teaching Activities | Lecture | 20 | 1:00 | 20:00 | Tutorials in Fluid Mechanics and Heat Transfer |
| Guided Independent Study | Project work | 40 | 1:00 | 40:00 | Individual project work. May include collection and analysis of materials and design calculations. |
| Scheduled Learning And Teaching Activities | Workshops | 4 | 1:00 | 4:00 | Support sessions for the design assignment. |
| Guided Independent Study | Independent study | 1 | 28:00 | 28:00 | Independent work, covering writing up lecture notes, revision and general reading. |
| Total | 200:00 |
Teaching Rationale And Relationship
Lectures convey the mathematical concepts and techniques in fluid mechanics and heat transfer; tutorials are used to provide supervised problem solving; workshops are used to provide support during the open-ended design case study assignment, and additional time is reserved for independent study, for literature and digital sources research, and for assessment preparation.
Assessment Methods
The format of resits will be determined by the Board of Examiners
Exams
| Description | Length | Semester | When Set | Percentage | Comment |
|---|---|---|---|---|---|
| Written Examination | 180 | 1 | A | 75 | 3 hour invigilated written exam. |
Other Assessment
| Description | Semester | When Set | Percentage | Comment |
|---|---|---|---|---|
| Report | 1 | M | 25 | Transfer Processes assignment. Open-ended design problem - fluid flow and heat transfer. |
Assessment Rationale And Relationship
The invigilated written exam will test both the fluids and heat transfer content studying in this module, containing a mixture of calculation-based questions, and critical evaluation questions (AHEP4 1-3,5,13).
The transfer processes assignment assesses the students’ ability to combine their knowledge of heat transfer and fluid flow to a chemical engineering open-ended design problem, making use of extended literature and digital sources research, and practicing report writing skills (AHEP4 1-6, 12, 13, 17).
Reading Lists
Timetable
- Timetable Website: www.ncl.ac.uk/timetable/
- CME2023's Timetable